Windows Password Recovery

Before, I won't able to open my desktop computer because I forgot my administrator password. Until I found this useful software over the internet. I download it and burn with Nero Burning tool.

Download here.

How to , recovery , Resetting Admin , Software , windows 7 , Windows XP 9:48 PM 1 comment

How To Remove Windows Activation Technology (WAT)

The Windows Activation Remover 2.2 allows the user of 32 & 64 bit Windows 7  to make their copy of Operating System Fully Genuine. 

It removes the activation counter and allows the windows to download updates from the internet, but it is recommended to disable your Windows updates to reduce error in the future use.

Download Here

How to , offline , Patch , Software , windows 7 4:02 AM No comments

Epson L200 Reset

Epson L200 is a new printer from Epson which using a CISS from the Epson original. Epson L200 and it did not escape from the counter of the protection system provided by the Epson. So when the printer is Epson L200 already full at the counter then we have to reset it to initial conditions. That is by using Epson Resetter L200.


Download the Adjustment Program Here..!


Procedures:

1. Turn Espon L200 and L200 make sure Espon already connect to the computer and installed drivers.
2. Then run Resetter Epson L200, by double clicking the file "AdjProg.exe"
3. Click "accept">> "Particular Adjustment Mode">> Select "Waste ink pad counter reset">> click "Check">> uncheck "play pad counters, FL Boxes counter, tube Ink Counter", then click the "initialization"> > "Finish".
4. The next step Epson L200 turn off, then disconnect the power.The last step reattach the power cord and turn on the printer, wait a while until Epson Epson L200 and L200 will return to normal.

That's it..Enjoy..

NOTE:

If you got any problem in following this guide feel free to ask questions by leaving a comment.

Epson , How to , Printer , Software 12:00 AM 3 comments

How to Unhide Folders or Files in CMD

Hiding is the most of the effects after Virus infection on your files or folders.

I experience it a lot of time since I start using USB flash and external hard drives. It is so irritating whenever your files become hidden and unable to restore it in its normal view in a simple procedures. So, I search over the Internet on how to get rid of it after the virus infection.

First, click START Menu

>All Programs

>Accessories

>  Command Prompt

or press WINDOWS key and "R"

To open RUN Application

Then type CMD, then press ENTER

and it shows like this

Then type the letter of your USB Flash drive. 

Example: F:

Then type ATTRIB -s -h -r -a *.* /s /d and press ENTER

Now, all your files and folders will return into normal view.

NOTE:

If you got any problem in following this guide feel free to ask questions by leaving a comment.

Anti-Virus , How to , Windows7 , WindowsXP 12:04 AM No comments

How to remove Windows Genuine Advantage (WGA) in XP

Way back in 2008, I have a Windows eXPerience before I was so frustrating how can I eradicate the Windows Genuine Advantage from Microsoft that always pop-up in my PC.

It is so annoying every time my computer will start. It shows like this.

so, I patiently search for the solution to make this thing off.

You can now easily get rid out of this annoying notification by downloading the software.

DOWNLOAD HERE..!

How to , Software , WGA , WindowsXP 9:14 PM No comments

How to Make Windows 7 Bootable USB

First, all we need are

4gb USB Flash Drive
Windows 7 DVD installer

Instructions:

1. Insert the USB Flash drive and format it using a formatting application or using this method;

Press

WINDOWS KEY + R  to open RUN application

2. Type "diskmgmt.msc", format the USB Flash drive by selecting NTFS format.

3. Next insert your Windows7/Windows  DVD into the optical drive and check the drive letter of the DVD drive. In this guide I will assume that your DVD drive letter is “F” and USB drive letter is “H” (open my computer to know about it).

4. Follow the step 1 again then type "CMD" in the RUN application box

5.Type  the following command now:

    X:\users\xxx> F: then hit ENTER

   

    

F: CD BOOT and hit enter.Where “F” is your DVD drive letter.

    CD BOOT and hit enter to see the below message.

5.Type another command given below to update the USB drive with BOOTMGR compatible code.

    BOOTSECT.EXE /NT60 H:

6. Copy your Windows 7 DVD contents to the USB flash drive.

7. Your USB drive is ready to boot and install Windows 7 . Only thing you need to change the boot priority at the BIOS to USB from the HDD or CD ROM drive. I won’t explain it as it’s just the matter the changing the boot priority or enabling the USB boot option in the BIOS.

Note: If you are not able to boot after following this guide means you haven’t set the BIOS priority to USB. If you got any problem in following this guide feel free to ask questions by leaving comment.

bootable , How to , USB , windows 7 12:07 AM No comments

How to Hack Admin Password in Windows 7

follow these steps:



1.Boot from Windows PE or Windows RE and access the command prompt.

2.Find the drive letter of the partition where Windows is installed. 

  In Vista and Windows XP, it is usually C:, in Windows 7, it is D: 

  in most cases because the first partition contains Startup Repair. 

  To find the drive letter, type C: (or D:, respectively) and search 

  for the Windows folder. 

 NOTE: that Windows PE (RE) usually resides on X:.

3.Type the following command (replace “c:” with the correct drive letter

  if Windows is not located on C:):

4.copy c:\windows\system32\sethc.exe c:\

5.This creates a copy of sethc.exe to restore later.

6.Type this command to replace sethc.exe with cmd.exe:

7.copy /y c:\windows\system32\cmd.exe c:\windows\system32\sethc.exe

8.Reboot your computer and start the Windows installation where you 

  forgot the administrator password.

9.After you see the logon screen, press the SHIFT key five times.

10.You should see a command prompt where you can enter the following

   command to reset the Windows password :

   "net user your_user_name new_password" -type it without ""

12.If you don’t know your user name, just type net user to list the

   available user names.

13.You can now log on with the new password.



I recommend that you replace sethc.exe with the copy you stored in the 

root folder of your system drive in step 3. For this, you have to boot 

up again with Windows PE or RE because you can’t replace system files 

while the Windows installation is online. Then you have to enter this 

command:



copy /y c:\sethc.exe c:\windows\system32\sethc.exe

NOTE:
If you got any problem in following this guide feel free to ask questions by leaving a comment.

How to , password , Resetting Admin , windows 7 11:21 PM No comments

How to Change Windows Logon Screen Background in Windws 7

Most IT enthusiast wanted to be different from the others.
Modifications of PC's is too broad at this time, by changing the font style to themes.

Anyway, here some of the modification I've learned from what they called "CURIOSITY".

I changed my Windows Logon Screen by using the Registry Editor and make an easy way to change it.

First, you must download this Registry Script of mine.. Click Here

Double click it to input the value to the Registry.

Then, Download and decompress this file CLICK HERE  using Winrar or Winzip application.
Copy and paste the folder named "Windows" to the system Drive or Local Disk C ( C:\ ) to Copy or Overwrite the Windows folder.

Note:
The picture in the C:\Windows\system32\oobe\info\backgrounds\backgroundDefault.jpg must be 160kb or less but not that much less, because it will be distorted.


Enjoy..!!!

NOTE:

If you got any problem in following this guide feel free to ask questions by leaving a comment.

background , How to , log-on screen , windows 7 , windows logon 8:34 PM No comments